Last Updated on August 30, 2022

Can You Recess A Refrigerator Into The Wall?

Recessing a refrigerator in an interior wall can increase available space in your kitchen, and can give your cooking space a more streamlined appearance. This project involves building a recessed area in an existing wall that’s sufficient to accommodate the refrigerator.

How much does it cost to recess a fridge to the wall?

Recess a standard-depth refrigerator a few inches into the wall behind it. The added depth might be enough to align it with surrounding countertops.

How can I make my refrigerator look built in?

“Adding ¾-inch panels left and right of fridge along with a deep cabinet above the fridge provides that built-in look.”

Can you enclose a refrigerator?

Enclose Your Fridge Taking your fridge from exposed to enclosed is a great way to give a kitchen a custom look. Better yet, if you’re looking at upgrading your appliances, consider a counter depth refrigerator.

Why is it not advisable to put a refrigerator on a wall or near the wall?

Rear placement provided a more natural spacing between the coils and the wall to promote air circulation and allow the heat that was generated to dissipate, but with the new configuration, placing the refrigerator next to wall spaces that are too close in proximity can hamper airflow and prevent the heated coils from …

Does a fridge need space on the sides?

Measure the Ventilation Space The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge.

Are refrigerators supposed to be flush with cabinets?

Do Fridges Need Space Around Them? In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.

Can you integrate a normal fridge?

if a tall fridge, you will need to buy 2 x tall end panels and a min of 346 wide doors making a 700 wide unit then slide the fridge in, same with a base fridge. integral appliances are built without the casing of a freestand and built to fit the unit.

Can any refrigerator be paneled?

You can purchase a panel ready version of just about any type of refrigerator on the market, including the popular side by side or French door options. Added features such as a water and ice dispenser will also add to the cost, as much as $1,300 more.

How do you recess a refrigerator?

Cut drywall to size, and install on the walls inside and outside the recess, using scrap lumber as nailing points where necessary. Cut and install drywall to cover the exposed studs and header in the kitchen and recess. Use corner bead on the exterior corners, then tape and sand all seams.

Does refrigerator need ventilation?

Refrigerators need to breathe. If they are entirely boxed in, then there’s not much room for ventilation. When you measure the space for the refrigerator, and compare it to the size of the refrigerator, leave at least 1 inch of extra room for the back and the top of the refrigerator.

How much ventilation space does a refrigerator need?

Leave space around the refrigerator to vent. Make sure that your refrigerator can breathe. Without proper ventilation, you can damage the fridge and cause it to consume more energy. You’ll need at least a quarter-inch gap for ventilation on the sides of the refrigerator as well as one inch on the back and top.

Do fridges need ventilation?

Appliances such as ovens, fridges, freezers and even microwaves all require a sufficient amount of ventilation.

How much ventilation does a refrigerator need?

Leave space around the refrigerator to vent. Make sure that your refrigerator can breathe. Without proper ventilation, you can damage the fridge and cause it to consume more energy. You’ll need at least a quarter-inch gap for ventilation on the sides of the refrigerator as well as one inch on the back and top.

How much space should be between side wall and refrigerator?

Space Between Refrigerator and Side Wall You should allow for a ½ inch to 1 inch of extra space between the refrigerator and side walls. Allow the same amount of clearance at the top. The refrigerator distance from the back wall should be a bit more, about 1 to 2 inches.

Can a freestanding refrigerator be built in?

As the name implies, these refrigerators are not meant to be integrated and therefore, improper installation can impact their longevity, warranty, and become a potential hazard, damaging the unit and/or the surrounding area.

What fridges can be integrated?

Integrated Fridges

• Fisher & Paykel RS90A1 476L Integrated French Door Fridge. …
• Miele FNS37402I 217L Integrated Column Freezer. …
• Miele KS37472ID 306L Integrated Column Fridge. …
• Fisher & Paykel RS9120WRJ1 477L Integrated Bottom Mount Fridge. …
• Liebherr ECBN5066RHH 462L Integrated Bottom Mount Fridge.

How much space do you need around an integrated fridge?

Unless otherwise specified, if the refrigerator is being integrated into cabinetry, there must be a minimum 200mm gap behind any cabinets above the refrigerator for ventilation.

Can you convert a normal fridge to integrated one?

As the name implies, these refrigerators are not meant to be integrated and therefore, improper installation can impact their longevity, warranty, and become a potential hazard, damaging the unit and/or the surrounding area. As a precaution, we recommend reading the Owner’s Manual for your product.

Are panel ready fridges worth it?

Cons: Reasons To Avoid While panel ready fridges offer a variety of benefits, they may not be right for everyone—especially those looking to remodel on a budget. Panel ready refrigerators are inherently in the high-end, built-in category. Therefore, they often cost more than standard or counter depth refrigerators.

What is a recessed refrigerator?

That is the point behind the recessed handles. They give your refrigerator a sleek look without anything protruding, including the handles. Thor’s recessed handle refrigerators come in a French door style. You will find enough space between each of the doors to use your hand, grasp the door, and open it.