Last Updated on October 19, 2022

How Do You Properly Use A Whetstone?

More videos on YouTube

1. Submerge your whetstone in water for between 10 to 15 minutes. …
2. Place the whetstone onto a tea towel or a surface on which it will not slip. …
3. Hold your knife firmly. …
4. Place an even and gentle pressure on your knife and draw the blade along the stone from tip to hilt.

What is the correct way to use a whetstone?

Table of contents

1. Saturate the Whetstone.
2. Position the Whetstone.
3. Position the Knife on the Stone.
4. Draw the Knife Back and Forth Across the Whetstone.
5. Flip and Repeat.
6. Move to the Fine Whetstone (If Applicable)

Aug 9, 2021

Should you push or pull on a whetstone?

Push the point you want to sharpen with your fingers. While keeping the angle and pushing the point with your fingers, stroke the blade until it reaches the other edge of the whetstone, then pull the blade back until it reaches the edge of the whetstone.

Do you use water or oil on a whetstone?

Despite the sound of the name, the term “whet” means “to sharpen,” and no oil or water is necessary to use with this stone. Whetstones, like other sharpening stones, usually feature two sides with separate grit: one coarse, and the other fine.

How long do you soak a wet stone?

Soak your sharpening stone in water before you use it – five minutes is usually enough, ten minutes is acceptable for coarse stones. For sharpening, rest the stone on a non-slip base or wedge it firmly between two pieces of wood.

Does a whetstone need to be wet?

Yes, a whetstone needs to be wet in order to be used. It should be soaked for at least 45 minutes.

Do I need to soak my whetstone?

Fine grit whetstones only need a few minutes of soaking; some chefs do not soak their fine grit stones to prevent any risk of cracking. Coarse grit whetstones should soak for 15 to 20 minutes. Once soaked, place a coarse grit whetstone on top of a kitchen towel.

Do you sharpen into the blade or away?

The narrow, pointed end of the sharpener should face in toward the thickness of the blade, away from the edge of the gut hook. Match the angle of the sharpener to the original edge angle. This will maintain the correct sharpening angle and prevent you from getting cut by the blade tip.

Do you sharpen a knife away or towards you?

Apply forces when pushing the knife away while the cutting edge is facing yourself (edge trailing stroke) is recommended. Pulling the knife towards yourself while the cutting edge is facing your side (edge leading stroke) is not recommended because it is generally harder to handle and more dangerous.

Can I use WD-40 on my sharpening stone?

Use WD-40 to Coat Your Stone: The specially formulated oil spray known as WD-40 is great for cleaning sharpening stone, as well as serve different purposes. Spray the oil on the surface of the stone and ensure you coat the entire surface with the oil.

Should you wet a knife before sharpening?

Natural sharpening stones can be used dry or wet, but wet is recommended. Water, water-based honing oil or petroleum- based honing oil keeps the pores of the stone clean, dissipates frictional heat and ensures smooth sharpening action.

Do you spit on a whetstone?

When there is no other option, a small amount of spit on the sharpening stone will suffice, however, spit contains salt, which can damage the fine edge of the blade over time. Another tip that will aid in knife sharpening is to use natural stone to sharpen the blade.

What happens if you use a whetstone dry?

In all but one of the cases, the dry stones quickly slowed and some even became useless. In addition, the majority of the stones used dry required more time and effort to clean or resurface afterwards than the stones used wet, most of which could simply be wiped off and put away.

What oil do you use on a whetstone?

Mineral oil is an ideal candidate for sharpening because it is light and does not harden or go rancid. A light oil is desirable because a heavy or viscous oil will interfere with the sharpening action of the stone.

Are diamond stones better than whetstones?

Diamond stones have key advantages over other types of sharpening stones. Diamond stones are the fastest cutting sharpening stones. Speed is especially helpful when working with coarse grits where you may spend additional time on a dull edge.

Is it better to push or pull when sharpening a knife?

Apply forces when pushing the knife away while the cutting edge is facing yourself (edge trailing stroke) is recommended. Pulling the knife towards yourself while the cutting edge is facing your side (edge leading stroke) is not recommended because it is generally harder to handle and more dangerous.

Should you go back and forth when sharpening a knife?

If you’re using a small portable sharpener, stroke the blade in nearly a straight direction. Remember to always cut into the stone and never pull or drag your edge backwards. The blade edge should face in the same direction as your stroke. So, you’re essentially moving the metal away from the edge.

How hard do you press when sharpening a knife?

Knife Sharpening demonstrating pressure variances. – YouTube

What is the best lubricant for a sharpening stone?

The best lubricant to use for diamond sharpening stones is a product called Krud Kutter. While plain water, windex ect. will work, Krud Kutter is the best lubricant to use for diamond sharpening stones.

What is the last thing you must do after sharpening a knife?

You’ll know to stop sharpening your knife when you feel the burr on both sides of the blade. The last step in sharpening is to remove the burr. This is done by simply repeating the same steps, only this time with less pressure.

Do you sharpen a knife in one direction?

If you’re using a small portable sharpener, stroke the blade in nearly a straight direction. Remember to always cut into the stone and never pull or drag your edge backwards. The blade edge should face in the same direction as your stroke. So, you’re essentially moving the metal away from the edge.